The most common types of Vertical Storage Systems are known as Vertical Storage Lifts (also known as VLMs, which stand for vertical lift modules) or Vertical Carousels. Vertical Storage Systems can be found in a variety of different configurations. Both of the solutions that were mentioned above are fully worthy alternatives when it comes to storing items on a limited amount of space; however, there are some notable differences between the two. In the following paragraphs, we will offer some of our most helpful advice regarding the circumstances in which a vertical storage lift or vertical carousel would be the most appropriate solution for your needs.
What's the difference between the two?
1. The construction of the drive lines for a vertical storage lift and a vertical carousel is where one of the most significant distinctions can be found between the two types of vertical lifts
2. A vertical storage lift typically consists of two distinct sections, each of which contains multiple trays
3. A crane located in the middle of the storage lift is responsible for transporting the trays to one or more picking openings on the lift
4. A vertical carousel, on the other hand, is made up of a band of carriers rather than a single carrier
5. The carriers in this type of carousel are all connected to one another and move in the same direction as the band does so as to present a carrier in the picking opening
Advantages of Utilizing Vertical Storage Lifts Vertical storage lifts have the ability to store heavier products, as well as products that vary more in height and width, under certain conditions.
A vertical storage lift is capable of handling heavier loads provided that the crane in the middle of the storage lift only lifts one tray at a time and that it does not turn a band that is carrying the weight of all of the goods in the unit.
• A vertical storage lift has the potential to be constructed with increased height, width, and depth in comparison to other types of lifts. To put it another way, it enables you to convert a limited amount of floor space into storage space that is very capable.
When it comes to the compression of trays as well as the frequency handling of the respective trays, the software that is connected to a vertical storage lift typically offers more options. Some manufacturers of vertical storage lifts include automatic goods height readers in the picking openings. This means that the lift automatically compresses the trays in order to make the most efficient use of the available space in the storage unit.
Advantages of utilizing vertical carousels
In comparison to a vertical storage lift, a vertical carousel primarily offers the advantages that are outlined in the following paragraphs:
• If you have a large number of identically sized small products, the Vertical Carousel Manufacturer is a fantastic alternative to consider. In this scenario, you have the opportunity to make full use of the capabilities offered by vertical carousels, which include the capacity to host a large number of storage locations on each carrier.
• Vertical carousels can be purchased in smaller models with less depth. This means that a Intelligent Vertical Carousel Manufacturer may be a good alternative for you if you are looking for a vertical storage space but have limited space in your warehouse or factory.
The construction of a Vertical Carousel Manufacturer is straightforward and sturdy, which frequently results in a more affordable price and simpler maintenance requirements.
Both vertical storage lifts and vertical carousels are good alternatives to consider if you are looking to improve your picking efficiency or find ways to store goods on a limited amount of space, respectively. Each business case needs to be evaluated on an individual basis, but in general, these things can be taken into account:
Vertical storage lifts are a great solution if you have enough space to build large and multiple units, as well as if you have SKUs that vary in size and volume. Vertical storage lifts can also save you a lot of money.
Vertical carousels are an excellent storage option for less diverse, smaller products that are limited in terms of volume and size. If you need to install the vertical storage systems footprint in a household with very little available space, it is possible to do so.
We have the knowledge and experience to lend a hand if you require assistance in selecting the most appropriate vertical storage system for your company. Feel free to get in touch with us, and we will do our best to find a solution that meets all of your needs.
It is possible to lease vertical storage systems because there are some finance companies that appreciate the value of industrial machinery and will take it as a security deposit. This allows for leasing of vertical storage systems.
What the financing company does is act as a lessor between the supplier of the vertical storage system (for example, a Relevator) and you as the buyer, thereby making it possible for you to buy the equipment by paying a monthly fee for as long as you continue to use it. If you lease the equipment, rather than making a large payment up front, your expenses will be more manageable and consistent on a monthly basis. As a result of the interest that is accrued on the leasing contract, the financing company will make a marginal profit.